Mazda Relearn 2

Mazda B Pickup 2007-2009
Tribute 2005-2011

Pro Tips!!!
-Make sure all tires are inflated to door placard suggested.

-Be sure ALL other sensors are out of range of vehicle antenna, (10 ft range min).

-Disable all other WiFi/Bluetooth and electronic accessory devices**.

**Includes HID kits, car audio systems, navigation, back-up cameras, if NOT original equipment, these devices may cause RF disruption.

** This Relearn method might require the use of a relearn magnet or a trigger tool.**

Relearn Procedures:

  1. Inflate all tires to pressure indicated on tire placard.
  2. Turn ignition to OFF position and press and release the brake pedal.
  3. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
  4. Press and release brake pedal.
  5. Turn ignition to OFF position.
  6. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
  7. Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will display TRAIN LF TIRE. Place antennae of learn tool on sidewall of LF tire 180 degrees from valve stem to activate sensor. Horn will sound once sensor has been recognized. Repeat step for RF, RR and LR tires.
  8. After training LF tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, the training procedure must be repeated.

See Full OBDII Relearn Troubleshooting Guide

Leave a Reply