BMW TPMS Relearn 2
M6 2006-2011
Pro Tips!!!
-Make sure all tires are inflated to door placard suggested.
-Be sure ALL other sensors are out of range of vehicle antenna, (10 ft range min).
-Disable all other WiFi/Bluetooth and electronic accessory devices**.
**Includes HID kits, car audio systems, navigation, back-up cameras, if NOT original equipment, these devices may cause RF disruption.
Inflate all tires to pressure indicated on tire placard.
If equipped with iDrive:
- Turn ignition to ON position (engine off).
- Press iDrive controller to use “i” menu.
- Select SETTINGS, press iDrive controller.
- Select CAR/TIRES, press iDrive controller.
- You may need to switch to the top field, select TIRES:RDC, and press iDrive controller.
- Start engine.
- Select CONFIRM TIRE PRESSURE, press iDrive controller.
- Vehicle must be driven to complete relearn.
If not equipped with iDrive: - Start engine.
- Hold turn signal lever in the up or down position until TPMS telltale symbol and RESET are displayed.
- Press button at end of turn signal lever.
- Press and hold button at end of turn signal lever until a check appears after RESET.
- Vehicle must be driven to complete relearn.
